Products
-
Adapter 18mm TF1/2
Suitable for TF1 and TF2 18mm adapter slot horizontal with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to accommodate various aircraft models on the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter Bonanza (without cap nut) TF1/2
Suitable for TF1 and TF2 25mm Adapter Vertical Slot Left with precise fit Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Beechcraft Bonanza without castle nut The adapter set is supplied as a pair and is used to attach the Beechcraft Bonanza without castle nut to the tractor models TF1 and TF2. This enables safe maneuvering while protecting the material. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=20mm with two-sided cap TF1/2
Suitable for TF1 and TF2 20mm adapter with cap on both sides with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to attach various aircraft models to the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the aircraft types specified, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=20mm Slot horizontal TF1/2
Suitable for TF1 and TF2 20mm adapter slot horizontal with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to accommodate various aircraft models on the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=20mm TF1/2
Suitable for TF1 and TF2 20mm adapter with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to attach various aircraft models to the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=25mm with double-sided cap TF1/2
Suitable for TF1 and TF2 25mm adapter with cap on both sides with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to accommodate various aircraft models on the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=25mm Slot horizontal TF1/2
Suitable for TF1 and TF2 25mm horizontal slotted adapter with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to attach various aircraft models to the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter D=25mm TF1/2
Suitable for TF1 and TF2 25mm adapter with precise fit Material: High-quality steel with material-friendly plastic inlays The adapter set is supplied as a pair and is used to attach various aircraft models to the TF1 and TF2 tug models. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the aircraft types specified, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter DA40/DA50 TF1/2
Suitable for TF1 and TF2 35mm adapter with precise fit Double-sided POM insert to prevent scratches Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Diamond DA40/DA50 The adapter set is supplied as a pair and is used to attach the Diamond DA40/DA50 to the tug models TF1 and TF2. The double-sided POM inserts optimally protect the nose landing gear, as there is no direct metal-on-metal contact. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the aircraft types listed, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter DA42 TF1/2
Suitable for TF1 and TF2 Double-sided POM insert to prevent scratches Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Diamond DA42 The adapter set is supplied as a pair and is used to attach the Diamond DA40/DA50 to the TF1 and TF2 tug models. The double-sided POM inserts optimally protect the nose landing gear, as no direct metal-on-metal contact occurs. This allows for safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter HK36 TF1/2
Suitable for TF1 and TF2 6mm adapter with precise fit Double-sided POM insert to prevent scratches Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Diamond HK36 The adapter set is supplied as a pair and is used to attach the Diamond HK36 to the tractor models TF1 and TF2. The double-sided POM inserts provide optimal protection for the nose landing gear, as there is no direct metal-on-metal contact. This enables safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Robin TF1/2 adapter
Suitable for TF1 and TF2 Aluminum Adapter Robin (Handwheel) with precise fit Material: High-quality steel with material-friendly plastic inlays This adapter is specially designed for Robin aircraft and differs slightly in handling from the other nose wheel adapters in the TF1 and TF2 series. The reason for this is the design of the adaptation points of Robin aircraft with nose wheel fairings. The adapter is first inserted into the wheel axle on the nose wheel fairing, rotated by 90° so that it slides behind the screw in the wheel axle, and only then locked with the ball lock pin on the adjustment axle of the TowFLEXX. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter Ruschmeyer TF1/2
Suitable for TF1 and TF2 18mm adapter with precise fit Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Ruschmeyer R90 The adapter set is supplied as a pair and is used to attach the Ruschmeyer R90 to the TF1 and TF2 tractor models. This allows for safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter Socata TB9/TB10 TF1/2
Suitable for TF1 and TF2 Material: High-quality steel Compatibility: Specifically for Socata TB9/TB10 The adapter is used to attach the Socata TB9/TB10 to the tug models TF1 and TF2. This allows for safe maneuvering that is gentle on materials. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter SR20/SR22 TF1/2
Suitable for TF1 and TF2 35mm adapter with a precise fit Double-sided POM insert to prevent scratches Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Cirrus SR20 and SR22 The adapter set is supplied as a pair and is used to attach the Cirrus SR20 and SR22 to the tug models TF1 and TF2. The double-sided POM inserts optimally protect the nose landing gear, as there is no direct metal-on-metal contact. This allows for safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the aircraft types specified, but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
TB20 TF1/2 adapter
Suitable for TF1 and TF2 25mm adapter with precise fit Double-sided POM insert to prevent scratches Material: High-quality steel with material-friendly plastic inlays Compatibility: Specifically for Socata TB20 (Trinidad) The adapter set is supplied as a pair and is used to attach the Socata TB20 to the tug models TF1 and TF2. The double-sided POM inserts optimally protect the nose landing gear, as no direct metal-on-metal contact occurs. This allows for safe and material-friendly maneuvering. IMPORTANT: Compatibility is not strictly limited to the specified aircraft types but primarily depends on the specific adaptation points on the respective aircraft.
€129,00
-
Adapter Extension TF1/2
Expand the possibilities of your TF1 or TF2. Our adapter extension is for aircraft with longer "noses" or taildragger aircraft where there is less space. Premium Material: Made from high-strength, durable quality steel. Perfect Handling: Enables safe maneuvering even with challenging tailwheel geometries. Easy Upgrade: Quick assembly Robust, secure, and precise – the perfect addition to your aircraft tug.
€129,00
-
GPU cable for TF3, TF4 and TF5
GPU cable for TF3, TF4 and TF5 with 3-pin connector as an extension of the on-board battery Not suitable for starting engines The GPU cable can be connected to the TF3, TF4, and TF5 tow tractors. The 3-pin connector is then connected to the aircraft, allowing the tow tractor's batteries to power, for example, the avionics in the cockpit. The tow tractors do not function as a full-fledged GPU but rather as a supplement to the aircraft's onboard battery. WARNING: The tow tractor, in conjunction with the ground power cables, is not designed to start aircraft engines!
€12,95
-
GPU cable for TF3, TF4 and TF5
GPU cable for TF3, TF4 and TF5 with 3-pin connector as an extension of the on-board battery Not suitable for starting engines The GPU cable can be connected to the TF3, TF4, and TF5 tow tractors. The 3-pin connector is then connected to the aircraft, allowing the tow tractor's batteries to power, for example, the avionics in the cockpit. The tow tractors do not function as a full-fledged GPU but rather as a supplement to the aircraft's onboard battery. WARNING: The tow tractor, in conjunction with the ground power cables, is not designed to start aircraft engines!
€12,95
-
Battery charger TF1/TF2
Battery charger for TF1 and TF2 Intelligent charging electronics Stop the charging process once the batteries are fully charged. with XLR connector * For older towing devices that are still equipped with a barrel connector, there is an additional adapter! Battery charger for TowFLEXX TF1 and TF2 Battery charger for TowFLEXX TF1 or TF2. This intelligent charger is specifically designed for use with the TowFLEXX TF1 and TF2 towing systems and features an XLR connector for a secure and stable connection. Intelligent charging circuit: The heart of this charger is its intelligent circuit, which automatically stops the charging process once the battery is fully charged. This feature protects your battery from overcharging, thus extending its lifespan and performance. Efficient charging: The optimized charging electronics ensure that your battery is charged quickly and efficiently, so that your TowFLEXX TF1 or TF2 is always ready for use when you need it. Easy to use: The charger is designed for ease of use and connects easily to the battery box of your tow vehicle. The robust XLR connector ensures a secure connection without loose contacts or interruptions during charging. NOTE: Some older Schleppmaxxe devices still have charging sockets with barrel connectors. You can use this charger for these older towable devices, but you will also need an adapter.
€152,90
-
Lead-gel battery (198Ah 12V)
198Ah 12V Lead-Gel Battery Delivery includes a single battery Maintenance-free and leak-proof Robust technology, even for high power peaks Battery replacements should always be carried out as a complete set, not individually TF3: 2x lead-gel battery TF4: 2x lead-gel battery TF5: 4x lead-gel battery TF6: 4x lead-gel battery Lead-Gel Battery 198Ah 12V for TF3, TF4, TF5 and HD190Increase the performance and reliability of your tugs with our high-quality lead-gel batteries. With a capacity of 198Ah and a voltage of 12V, this battery is ideal for TowFLEXX TF3, TF4, TF5 and TF6 tugs.Durable and Reliable: Our lead-gel battery is specifically designed to offer a long service life and constant performance. The gel technology prevents leaks and is maintenance-free, making it an excellent choice for demanding operations.Environmentally Friendly and Safe: The battery is environmentally friendly and, thanks to its safe design, provides a reliable energy source with no risk of acid leakage. Unlike lithium batteries, transport is also completely trouble-free!Simple Installation: All TowFLEXX tugs are designed to be not only low-maintenance but, in general, capable of being maintained primarily by our customers themselves. Replacing the batteries can also be done in just a few simple steps without requiring extensive prior knowledge. NOTE: We advise against replacing batteries in our systems individually; they should always be replaced as a set! ATTENTION: If the batteries are not charged regularly, they can be permanently damaged within a very short time. Charge your tug at least once a month. With intensive use, the tug will indicate that the batteries need to be charged. Failure to do so can lead to irreparable damage and is not covered by the warranty. For the TF3, TF4, TF5 and TF6 models, we also recommend measuring the voltage of each individual battery once a year and, in the event of deviations, charging them individually with a standard charger. Instructions on Battery Disposal In connection with the distribution of batteries or the delivery of devices containing batteries, we are obligated to inform you of the following:As an end-user, you are legally obligated to return used batteries. You can return old batteries that we carry or have carried in our range as new batteries to our shipping warehouse (shipping address) free of charge. The symbols depicted on the batteries have the following meaning: The symbol of the crossed-out wheeled bin means that the battery must not be disposed of in household waste.Pb = Battery contains more than 0.004 percent lead by massCd = Battery contains more than 0.002 percent cadmium by massHg = Battery contains more than 0.0005 percent mercury by mass.Special provisions for the sale of starter batteriesIn connection with the distribution of vehicle batteries, as far as you are an end consumer, we are obligated under Section 10 of the German Battery Act (BattG) to charge a deposit of 7.50 Euros including VAT per vehicle battery if you do not return an old vehicle battery at the time of purchase of a new one. The deposit is not included in the purchase price and is shown on the item alongside the final price.If you return an old vehicle battery to us that we carry or have carried in our range as a new battery in accordance with Section 9 of the German Battery Act (BattG), we are obligated under legal regulations to take it back free of charge and refund the deposit amount.The return location is the address listed in the legal notice.Returning the old battery by mail is not permitted due to the ordinance on the transport of dangerous goods.Alternatively, old vehicle batteries can also be handed in free of charge at recycling centers. The deposit we charge will not be refunded by public recycling centers. However, you have the option there to have the return of the old vehicle battery confirmed on an invoice/delivery note. Upon presentation of this confirmation, you will receive the battery deposit back from us. Please observe the above instructions.Further information can also be found at: https://www.gesetze-im-internet.de/battg/__10.html
€655,00
-
Bowden cable set TF1/TF2
Bowden cable set for TF1 and TF2 Pre-assembled set for easy installation consisting of handle, mounting and pull rope Bowden cable set for TowFLEXX TF1 and TF2 Get your TowFLEXX TF1 or TF2 back in working order with the Bowden cable set. This set is an essential spare part, specifically designed for the precise control of the adjustment axis of your tow plane. It allows for the smooth opening and closing of the adjustment axis for safely launching or releasing an aircraft. Complete set for immediate use: Our Bowden cable set includes an ergonomically shaped handle, the corresponding mounting hardware, and the robust pull cable. This combination offers reliable and easy handling, simplifying the daily operation of your TowFLEXX. The set is pre-assembled and can be installed on the tractor in just a few steps. Easy installation: Installing the Bowden cable set is straightforward and can be done quickly without special tools or extensive technical knowledge. It is perfectly designed to fit your TowFLEXX TF1 or TF2.
€104,50
-
Rotary switch TF1/TF2
Rotary switch for TF1 and TF2 replaces old "bone protection" removable The rotary switch for TF1 and TF2 has replaced the tried-and-tested "bone lock" or "short-circuit plug" used to switch older devices on and off. The new rotary switch has three positions and offers a secure hold, thus minimizing the risk of it being easily lost. Position 1: ON - makes the tractor ready for operation Position 2: OFF - switches off the tractor Position 3: UNLOCK - unlocks the rotary switch so that it can be removed.
€24,20
-
Off-Road Tire Kit TF1/TF2
Off-road tire kit for TF1 and TF2 consisting of two off-road tires including steel rim Improved traction pre-assembled Off-road tire kit for TowFLEXX TF1 and TF2 Enhance the mobility and flexibility of your TowFLEXX TF1 or TF2 with the off-road tire kit. This set includes two high-quality tires with a robust off-road tread, mounted on durable steel rims. Ideal for use on uneven terrain and in demanding environments. Optimal performance on any terrain: The all-terrain tires offer excellent traction and stability on various surfaces, from grass to unpaved paths. This allows for safe maneuvering of your TowFLEXX tractor even under difficult conditions. Easy installation: The off-road tire kit is designed for easy installation on your TF1 or TF2 without special tools or extensive knowledge. The steel rims ensure a secure and quick fit. FAQ: Why is the individual kit more expensive than configuring a new device and selecting off-road tires there? Answer: When configuring a new device, only the additional cost for the off-road tires is charged, as the cost of the standard tires is deducted. When purchasing an individual kit as a retrofit, the tires must be bought separately, without any credit for the standard tires, which explains the higher cost. NOTE: The off-road tires for the TowFLEXX TF1 and TF2 offer additional traction, but have their limits, for example on heavily wet lawns or other ground conditions that lead to more resistance.
€352,00
You have seen 24 out of 42 products